Aeotec has added nine devices to the Works with Home Assistant program, giving the platform a certified selection of sensors, switches, sirens and a smoke-detector upgrade. The group includes five products using Z-Wave Long Range, while another device was evaluated through Home Assistant’s Zigbee integration.
Home Assistant says the program checks certified hardware for privacy and local operation. Certification also requires manufacturers to maintain the expected functionality of their products in Home Assistant over time without making cloud access a requirement. Aeotec has committed to continued support and firmware updates for the newly certified products.
Long-range Z-Wave devices require compatible hardware
The five Aeotec products supporting Z-Wave Long Range are available in the United States and the European Union. The extended-range mode is not automatically provided by every Z-Wave controller: Home Assistant says it requires a compatible adapter, such as the Home Assistant Connect ZWA-2. Older adapters can still connect the devices using standard Z-Wave, but without the additional Long Range capability.
Home Assistant describes Z-Wave Long Range as a direct connection between each device and the adapter rather than a mesh path through other Z-Wave products. Under line-of-sight conditions, the platform cites a range of up to 1 km. For comparison, Home Assistant places standard Z-Wave at around 300 m and lists network capacity of 232 devices, versus up to 4,000 devices for Z-Wave Long Range.
| Certification area | Details reported by Home Assistant |
|---|---|
| Certified Aeotec devices | 9 |
| Z-Wave Long Range devices | 5 |
| Named products | Door Window Sensor 8, Water Sensor 8, MultiSensor 8 and SmokeShield |
| Long Range adapter example | Home Assistant Connect ZWA-2 |
| Other wireless technology in the group | Zigbee |
Local control and installation considerations
The Aeotec products operate locally through Home Assistant’s Z-Wave integration, with Z-Wave JS providing the driver. The setup also supports SmartStart, which allows a device to be added by scanning its QR code, and S2 encryption for communications. The Long Range products in the new group also carry certification from the Z-Wave Alliance.
Home Assistant says its team evaluated the Z-Wave hardware using Home Assistant Container on an Intel NUC with the Home Assistant Connect ZWA-2. The Zigbee device was tested with the Home Assistant Connect ZBT-2 and the Zigbee Home Automation integration. These details identify the controller and integration combinations used during certification, which is relevant when installers assess compatibility rather than relying solely on a device’s wireless standard.
For dealers and integrators, the announcement combines protocol support with a stated maintenance commitment. The certification covers the device’s operation inside Home Assistant, including local control and continued functionality, while the choice between standard Z-Wave and Z-Wave Long Range depends on the adapter used in the installation. Aeotec’s certified lineup therefore spans both existing Z-Wave environments and installations equipped for the newer long-range mode.
- Five of the nine certified devices support Z-Wave Long Range.
- Home Assistant requires a compatible adapter to use the extended-range mode.
- The program includes privacy, local-operation and ongoing-support requirements.