Nabu Casa has introduced the Home Assistant Connect AUX-2, a compact interface designed to extend an existing Home Assistant installation into audio systems, AV equipment and other connected devices. The unit combines network connectivity, serial control, Bluetooth functionality and USB expansion in hardware based on Espressif’s ESP32-S3R8 microcontroller.
For custom integrators, the device brings several connection methods together at the edge of a Home Assistant system. Its wired network interface uses a W5500 Ethernet controller and supports IEEE 802.3af Power over Ethernet, allowing network data and electrical power to use the same connection. Wi-Fi is also available through 2.4GHz 802.11b/g/n, while Bluetooth 5 LE supports nearby wireless devices.
Audio and serial connections
The AUX-2 includes a shared 3.5mm connection that can operate as either analog stereo or optical S/PDIF. Only one of those modes can be active at a time, and both support 16-bit/48kHz stereo audio. Compatible playback formats include FLAC, MP3 and WAV.
Through Music Assistant and the Sendspin protocol, Nabu Casa says the unit can send audio to conventional Hi-Fi systems and AV receivers. Playback can also be synchronized with compatible smart speakers, placing the AUX-2 within the broader multiroom audio functions available through Home Assistant.
| Feature | Details |
|---|---|
| Platform | Home Assistant |
| Processor | Espressif ESP32-S3R8 with 8MB of PSRAM and 8MB of flash storage |
| Audio output | Shared 3.5mm analog stereo or optical S/PDIF; 16-bit/48kHz stereo |
| Audio formats | FLAC, MP3 and WAV |
| Serial control | Two 3.5mm RS-232 ports with configurable transmit and receive assignments |
| Networking | Ethernet with IEEE 802.3af PoE, plus 2.4GHz 802.11b/g/n Wi-Fi |
| Wireless and expansion | Bluetooth 5 LE and USB-A |
Two 3.5mm RS-232 ports provide a control path for equipment such as televisions, AV receivers, projectors and UPS systems. Their transmit and receive pin assignments can be configured, which allows the interface to accommodate compatible serial devices with different connection requirements.
The USB-A port expands the system beyond the AUX-2’s built-in interfaces. Nabu Casa identifies the Home Assistant Connect ZWA-2 Z-Wave adapter and USB-to-RS-485 converters as examples of peripherals that can be connected. The Z-Wave adapter can consequently be located away from the main Home Assistant hardware rather than being attached directly to it.
Bluetooth and network deployment
The unit can operate as a Bluetooth proxy, carrying communication from nearby Bluetooth smart-home devices across the network to Home Assistant. The stated implementation supports up to three active Bluetooth connections. That function sits alongside the AUX-2’s Wi-Fi and Ethernet options, giving installers multiple ways to place the hardware within an installation.
Audio conversion is handled by a Texas Instruments PCM5122 digital-to-analog converter. Nabu Casa lists a 112dB signal-to-noise ratio for the converter. The combination of network audio, serial interfaces and peripheral support positions the Connect AUX-2 as a general-purpose bridge for Home Assistant systems that need to communicate with legacy AV equipment as well as newer wireless devices.